Forced-Air Furnaces

Our boilers maximize the heating value of every cubic foot of natural gas or propane!

Condensing boiler technology is the most efficient, environmentally friendly form of gas heating available today. Thanks to lower fuel consumption and lower heating costs, condensing boilers usually pay for themselves in only 2 to 5 years. Additionally, a modern condensing heating system increases the value of the building as well as quality of life by reducing emissions. Contemporary condensing technology offers an intelligent, easy-to-install solution to rising fuel costs and meets air quality regulation requirements.

Available Boiler Brands

buderus boilers

Buderus GC144 Gas-Fired Boiler

Buderus Gas Model GC124NEW! Efficiency ratings of 85% on all models!
Designed and manufactured by the world leader in hydronic heating the Buderus GC144 boiler is a compact, easy to install boiler with all the features and benefits Buderus customers have come to expect.

  • Designed as a replacement to almost any make or model boiler
  • Compatible with Natural Gas or Propane

Buderus G234X Gas-Fired Boiler

Buderus Gas Model G234XThe G234X offers low emissions and are designed for many years of trouble-free operation.

  • Full 3½” of thermal insulation for minimal standby heat losses
  • Offers low emissions with Premixed Burner Technology
  • Dura

Buderus G334X Gas-Fired Boiler

Buderus Gas Model G334XThe G334X series offers a full 3” of thermal insulation for minimal standby heat losses, optimum heat transfer, and efficient operation.

  • Limited lifetime warranty
  • State-of-the-art design in cast iron boilers
  • Available in natural gas but easily converts to propane

Buderus GA124 Gas-Fired Boiler

Buderus Gas Model GA124Buderus GA124 boilers are designed for single or multiple family homes and guarantee reliable heating for many years.

  • Sealed combustion and draft induced venting design
  • Perfect for single or multi-family homes
  • Efficiency ratings of 85%+

Buderus GB142 Gas-Fired Boiler

Buderus Gas Model GB142Innovative ALU-plus condensing heat exchanger for long life and easy servicing.

  • Approved for commercial applications
  • State-of-the-art design – Wall Hung boiler
  • Utilizes advanced condensing technology
  • Minimal clearance requirements for tremendous installation flexibility

Buderus GB162 Gas-Fired Boiler

Buderus Gas Model GB162The GB162 is a high-performance, compact gas condensing boiler capable of achieving ultra-high efficiency levels. Innovative ALU-plus condensing heat exchanger for long life and easy servicing.

  • Designed for Stand-Alone or Cascades
  • Ultra-High Efficiencies
  • Ideal for Smaller Commercial Buildings and Large Residences
  • Unique Manifold for Easy Installation of Single Units or Cascades
  • Innovative ALU-plus Condensing Heat Exchanger for Long Life and Easy Servicing

Crown Boilers

The Phantom Series

Phantom SeriesNEW! Efficiency ratings of 85% on all models!
The Phantom Series boiler is a stainless steel, water tube, high-efficiency, condensing, gas-fired, hot water boiler. There are multiple venting options to suit homeowner and installer preferences. The Phantom is designed to be wall-mounted for when floor space is at a premium. The Phantom is available in natural gas, with a field conversion for LP gas.

Bimini - Residential Serires

Bimini (BWC) SeriesThe Bimini (BWC) Series boiler is a cast aluminum, high-efficiency, condensing, direct-vent, gas-fired, hot water boiler. There are multiple venting options to suit homeowner and installer preferences. Some models are designed to be wall-mounted for when floor space is at a premium. The BWC is available in both natural and LP gas models.

The BWC also includes a microprocessor-based control system. Additional features include direct spark ignition, outdoor reset temperature sensor, domestic hot water priority, pump controls for heating and domestic hot water and a fully modulating burner. The BWC comes fully wired and ready for installation.

Aruba 4 (AWR) Series

Aruba 4 SeriesThe Aruba 4 Series (AWR) residential, cast iron, hot water boiler is a fully-packaged, installer-ready product. The rear draft diverter provides a low profile design that allows for closet applications on AWR models through the AWR210. This atmospheric, gas-fired boiler is for use with a conventional chimney fueled with natural or LP gas. The Aruba 4 features a standardized Honeywell Intermittent Ignition System.

The Aruba 4 comes with an Integrated Boiler Control with temperature control, relay, and ignition functions in a single module. This includes an additional circulator output for a second heating zone or an indirect water heater like the Mega-Stor. All controls are located inside the front vestibule, creating a clean look and space efficient design. With the controls located in the front of the boiler and supply/return tappings on both the left and right side, the Aruba 4 has flexible installation options to fit most locations.

Bali Series (BWF) Series

balibwfThe Bali Series (BWF) residential, cast iron, hot water boiler is a fully-packaged, installer-ready product. An integral fan permits venting directly through a wall. With the addition of a Category-1 Vent Kit, the Bali has the option of venting into some chimneys that are too small to vent an atmospheric boiler of the same input. The Bali Series is packaged with an electronic ignition system and has the option of either natural or LP gas.

Cabo 2 (CWD)

CWDThe CABO-2 Series (CWD) residential, cast iron, direct-vent, hot water boiler is a fully-packaged, installer-ready product. The Cabo 2 Series is packaged with an electronic ignition system and has the option of either natural or LP gas. The Cabo-2 Series control supports priority zoning for an indirect water heater and an optional plug-in outdoor temperature reset control. Each model is ENERGY STAR® qualified.

A cast iron, wet-leg heat exchanger provides efficient heat transfer and reliability over the product’s lifetime.

Cayman (CWI) Series

CWIThe Cayman Series (CWI) residential/light commercial, cast iron, hot water boiler is a fully-packaged, installer-ready product. The integral draft diverter provides a low profile design allowing the boiler to be installed in areas requiring a low clearance. This atmospheric, gas-fired boiler is for use with a conventional chimney.

The Cayman Series is packaged with the option of either natural or LP gas as well as an electronic ignition system. The Cayman Series also includes an optional tankless coil for domestic hot water (see specifications) and a larger range of available sizes.

Bermuda Series (BSI)

BSIThe Bermuda Series (BSI) residential/light commercial, cast iron, steam boiler is a fully-packaged, installer-ready product. The integral draft diverter provides a low profile design allowing the boiler to be installed in areas requiring a low clearance. This atmospheric, gas-fired boiler is for use with a conventional chimney. The Bermuda Series also comes standard with a probe-type low water cut-off safety control. The Bermuda Series is packaged with the option of either natural or LP gas as well an electronic ignition system.

The heat exchangers are built with steel push nipples below the water line where superior strength and resistance to expansion and contraction is important. Cast iron push nipples above the water line are larger than often found on similar units to provide optimum steam quality.

Bryant Forced-Air Furnaces

Available Models Coming Soon

 

Carrier

Available Models Coming Soon